A 2.4 GHz connection travels farther at lower speeds, while 5 GHz frequencies provide faster speeds at shorter range . Your choice of 2.4 GHz or 5 GHz will depend on where and how you use your WiFi connection most.
Read moreWhat WLAN channel should I use?
On a non-MIMO setup (i.e. 802.11 a, b, or g) you should always try to use channel 1, 6, or 11 . If you use 802.11n with 20MHz channels, stick to channels 1, 6, and 11 — if you want to use 40MHz channels, be aware that the airwaves might be congested, unless you live in a detached house in the middle of nowhere.22 Tem 2021
Read moreWhat are the different WiFi channels?
The 2.4GHz band is broken up into 11 channels (1-11), each 20MHz wide. In the 5GHz band, we have channels ranging from 36 up to 165, and in the 6 GHz band, we have Wi-Fi channels ranging from 1-233. Both frequencies allow for channel width from 20 MHz-160 MHz).
Read moreWhat are the channels for 2.4 GHz?
The recommended channels to use on 2.4 Ghz are Channel 1, 6 & 11 . As can be seen in the above diagram, these channels do not overlap into each other. In general 2.4 Ghz should be considered a legacy band for older devices that do not support 5 Ghz. It is often more crowded and less performant than 5 Ghz.
Read moreWhat is the spacing between channels in the 2.4 GHz spectrum?
2.4 GHz (802.11b/g/n/ax) Fourteen channels are designated in the 2.4 GHz range, spaced 5 MHz apart from each other except for a 12 MHz space before channel 14. Nations apply their own RF emission regulations to the allowable channels, allowed users and maximum power levels within these frequency ranges.
Read moreHow many total channels are there in the 2.4 GHz spectrum?
The 2.4GHz band is broken up into 11 channels (1-11), each 20MHz wide.
Read moreWhat is a good WiFi frequency band in use?
Ideally, the 2.4GHz band should be used to connect devices for low bandwidth activities like browsing the Internet. On the other hand, 5GHz is the best option for high-bandwidth devices or activities like gaming and streaming HDTV.
Read more