The recommended channels to use on 2.4 Ghz are Channel 1, 6 & 11 . As can be seen in the above diagram, these channels do not overlap into each other. In general 2.4 Ghz should be considered a legacy band for older devices that do not support 5 Ghz. It is often more crowded and less performant than 5 Ghz.
Read moreWhat is the spacing between channels in the 2.4 GHz spectrum?
2.4 GHz (802.11b/g/n/ax) Fourteen channels are designated in the 2.4 GHz range, spaced 5 MHz apart from each other except for a 12 MHz space before channel 14. Nations apply their own RF emission regulations to the allowable channels, allowed users and maximum power levels within these frequency ranges.
Read moreHow many total channels are there in the 2.4 GHz spectrum?
The 2.4GHz band is broken up into 11 channels (1-11), each 20MHz wide.
Read moreWhat is the best frequency channel for WiFi?
For best results, it is highly recommended to keep the 2.4 GHz channels to 1, 6, and 11, as these channel settings will allow for virtually no overlap in the WiFi signal.
Read moreWhich is better 20 MHz or 40 MHz?
Thus, the difference between 20 MHz and 40 MHz is throughput. 40 MHz has higher throughput than 20 MHz thanks to channel bonding. There are downsides to channel bonding. While 40 Mhz might have higher throughput than 20 Mhz, it also reduces the number of non-overlapping channels.
Read moreWhat is the best channel for 2.4 GHz?
The recommended channels to use on 2.4 Ghz are Channel 1, 6 & 11 . As can be seen in the above diagram, these channels do not overlap into each other. In general 2.4 Ghz should be considered a legacy band for older devices that do not support 5 Ghz. It is often more crowded and less performant than 5 Ghz.
Read more