On the 5 GHz band, set the channel width to 40 MHz and see if that improves reliability. Keep in mind that 80 MHz and 160 MHz channel widths may carry the promise of extra speed, but will also interfere with, and receive interference from, many more sources than 40 MHz.
Read moreWhat is channel bandwidth?
The channel bandwidth is defined as the effective bandwidth multiplied by the frequency reuse factor , where the effective bandwidth is the operating bandwidth that is appropriately scaled by the uplink/downlink ratio.
Read moreWhat is the maximum Tx bandwidth configuration?
Maximum transmission bandwidth configuration 2-1 . Note: SCS of 60kHz can be used for both FR1 and FR2. … FR1 may use channel bandwidth of up to 50MHz when using 15kHz subcarrier spacing, and up to 100MHz when using 30 or 60kHz subcarrier spacings.
Read moreWhat is maximum bandwidth available in FR2 spectrum?
Due to much wider channel bandwidths targeted in NR, the maximum channel bandwidth per component carrier has been increased to 100 MHz in FR1 (using SCSs of 30 and 60 kHz) and 400 MHz in FR2 (using 120 kHz SCS).
Read moreWhich subcarrier spacing does FR1 band support in SSB part?
SSB Subcarrier Spacing for FR1 = 15 Khz . SSB Subcarrier Spacing for FR2 = 60 Khz.
Read moreWhat is the minimum bandwidth of a 5G band?
The minimum is 20 MHz and the maximum is 50 MHz.
Read more