On a non-MIMO setup (i.e. 802.11 a, b, or g) you should always try to use channel 1, 6, or 11 . If you use 802.11n with 20MHz channels, stick to channels 1, 6, and 11 — if you want to use 40MHz channels, be aware that the airwaves might be congested, unless you live in a detached house in the middle of nowhere.22 Tem 2021
Read moreWhat are the different WiFi channels?
The 2.4GHz band is broken up into 11 channels (1-11), each 20MHz wide. In the 5GHz band, we have channels ranging from 36 up to 165, and in the 6 GHz band, we have Wi-Fi channels ranging from 1-233. Both frequencies allow for channel width from 20 MHz-160 MHz).
Read moreWhat is the best frequency channel for WiFi?
For best results, it is highly recommended to keep the 2.4 GHz channels to 1, 6, and 11, as these channel settings will allow for virtually no overlap in the WiFi signal.
Read moreWhich is better 20 MHz or 40 MHz?
Thus, the difference between 20 MHz and 40 MHz is throughput. 40 MHz has higher throughput than 20 MHz thanks to channel bonding. There are downsides to channel bonding. While 40 Mhz might have higher throughput than 20 Mhz, it also reduces the number of non-overlapping channels.
Read moreWhat is the best channel for 2.4 GHz?
The recommended channels to use on 2.4 Ghz are Channel 1, 6 & 11 . As can be seen in the above diagram, these channels do not overlap into each other. In general 2.4 Ghz should be considered a legacy band for older devices that do not support 5 Ghz. It is often more crowded and less performant than 5 Ghz.
Read more