The RRC messages are encrypted and checked for integrity . The RRC ConnectionReconfiguration message is used by the eNB entity to command a modification of the RRC connection. This message may relate to the configuration of the measurements, control of the mobility and configuration of the DRB default bearer.
Read moreWhat is RRC setup in 5G?
The Radio Resource Control (RRC) protocol is used in UMTS, LTE and 5G on the Air interface. It is a layer 3 (Network Layer) protocol used between UE and Base Station . This protocol is specified by 3GPP in TS 25.331 for UMTS, in TS 36.331 for LTE and in TS 38.331 for 5G New Radio.
Read moreWhat does RRC mean in LTE?
3GPP LTE RRC (Radio Resource Control ) Layer.
Read moreWhat is the function of RRC?
The RRC protocol performs the following functions: broadcasting information system, control of the connection, control of the radio bearer, control of handover, transfer of measurement reports .
Read moreWhat is RRC in networking?
Summary. Radio resource control (RRC) is the highest layer in the control plane of the access stratum (AS) . It also transfers messages of the non-access stratum (NAS), which is located above the RRC layer.
Read moreWhat is RRC reconfiguration?
RRC CONNECTION RECONFIGURATION message is the command to modify an RRC connection . The purpose of this procedure is, · To establish/modify/release Radio Bearers. · To perform Handover. · To setup/modify/release Measurements.
Read moreWhat is RRC inactive in 5G?
In 5G, they have introduced new RRC Stats called “RRC Inactive” to minimize latency as well as to reduce signalling load . Transitions from RRC Inactive to Connected is very quick as UE Context is stored at gNB and UE. NG signalling keep alive between gNB to AMF, GTP-U also remain alive between gNB to UPF.
Read more