In OFDM and OFDMA PHY layers, the DC subcarrier is the subcarrier whose frequency is equal to the RF centre frequency of the transmitting station . It corresponds to frequency zero (Direct Current) if the FFT signal is not modulated.
Read moreWhat is subcarrier frequency?
A subcarrier is a secondary modulated signal frequency modulated into the main frequency (the carrier) to provide an additional channel of transmission . It allows for a single transmission to carry more than one separate signal.
Read moreWhy are there different subcarrier spacing in 5G?
Wider subcarrier spacing would provide better resistance to such increased Doppler shifts at higher frequency bands . Furthermore, 5G NR provides a flexible solution to support various applications by choosing an appropriate configuration. For example, when higher Δf is used, it results in a shorter slot duration.
Read moreWhat is subcarrier bandwidth in LTE?
Each subcarrier is able to carry data at a maximum rate of 15 ksps (kilosymbols per second) . This gives a 20 MHz bandwidth system a raw symbol rate of 18 Msps. In turn this is able to provide a raw data rate of 108 Mbps as each symbol using 64QAM is able to represent six bits.
Read moreWhat is RRC reestablishment?
The purpose of RRC CONNECTION RE-ESTABLISHMENT procedure is to re-establish the RRC connection, which involves the resumption of SRB1 operation and the re-activation of security (without changing algorithms).
Read moreWhat is RRC connection setup?
The RRC CONNECTION SETUP message is used to establish SRB1 . It contains configuration information for SRB1. This allows subsequent signaling to use the DCCH logical channel. The configuration for SRB1 can be a specific configuration or the default configuration.
Read moreWhat is RRC in LTE?
The Radio Resource Control (RRC) protocol is used in UMTS, LTE and 5G on the Air interface. It is a layer 3 (Network Layer) protocol used between UE and Base Station.
Read more