Generally rs power = pmax – 10 log 10 (number of rb * 12 ) + any mimo gain .
Read moreHow do you calculate reference power?
Sub-carrier Spacing 30 KHz 273 RBs with 100MHz
Read moreWhat is Rs EPRE?
Then the RS power per subcarrier and symbol, called Energy per Resource Element (EPRE) in the standard, is 0*log 0(subcarriers) below the maximum total output power (assuming all subcarriers are at the same power level). This means that RS is 27.78 dB below the maximum channel power for a 0 MHz LTE channel bandwidth.
Read moreHow do you calculate power in LTE RS?
RS Tx. Power (Avg) is calculated by summing the powers of all resource elements occupied by C-RS on the reference measurement channel in the Measurement Interval and dividing by the total number of resource elements in the Measurement Interval .
Read moreHow is throughput LTE calculated?
If modulation used is 64 QAM (6 bits per symbol) then throughput will be 16.8×6=100.8Mbps for a single antenna port . If we consider a 2×2 MIMO system then this throughput will be double i.e. 100.8×2= 201.6 Mbps and with 4×4 MIMO system then throughput is about 100.8×4= 403.2 Mbps.
Read moreWhat is the throughput of a file transfer?
Throughput and bandwidth are two different but closely related concepts. To summarize, throughput is an actual measure of how much data is successfully transferred from source to destination , and bandwidth is a theoretical measure of how much data could be transferred from source to destination.
Read moreHow is throughput Mbps calculated?
Output: We can calculate the throughput as- Throughput = (12, 000 x 10, 000) / 60 = 2 Mbps The throughput is nearly equal to one-fifth of the bandwidth in this case. For the difference between Bandwidth and Throughput, refer.
Read more