The 802.11a standard uses the same core protocol as the original standard and was the first of the 802.11 family to operate in the 5 GHz band. It uses a 52-subcarrier orthogonal frequency-division multiplexing (OFDM) with a maximum raw data rate of 54 Mbit/s, which typically yields a throughput in the mid-20 Mbit/s.
Read moreHow does OFDM work on Wi-Fi?
OFDM takes an RF channel, such as the 20 MHz channel often used in Wi-Fi, and instead of using a single carrier-frequency modulated by AM, FM, or other means, sets out a number of sub-carriers. 802.11ac used 52 data-carrying sub-carriers in a 20 MHz RF channel, while 802.11ax has 234.
Read moreWhat is OFDM wireless?
Orthogonal frequency-division multiplexing is a method of data transmission where a single information stream is split among several closely spaced narrowband subchannel frequencies instead of a single Wideband channel frequency .
Read moreIs OFDM used in 2.4 GHz?
OFDM-based wireless LANs will be implemented in the 2.4GHz ISM band as well as the 5GHz band. OFDM WLANs provide very high data rates, resilience to multipath and extended operating range.
Read moreWhat is OFDMA technology?
OFDMA is the multi-user variant of the OFDM scheme where multiple access is achieved by assigning subsets of time-frequency resources to different users, allowing simultaneous data transmission from several users .
Read moreWhat is OFDM in GSM?
OFDM is a form of multicarrier modulation . An OFDM signal consists of a number of closely spaced modulated carriers. When modulation of any form – voice, data, etc. is applied to a carrier, then sidebands spread out either side.
Read moreHow OFDM is implemented?
Simple Analog OFDM system Implementation Each subcarrier transmits one bit of information (N bits total) as indicated by its presence or absence in the output spectrum . The frequency of each subcarrier is selected to form an orthogonal signal set. These frequencies are also known at the receiver for signal recovery.
Read more