The term “satellite transponder” refers collectively to a transmitter-receiver subsystem on board the satellite that processes, amplifies and retransmits a range of frequencies (the transponder bandwidth) to another location/terminal/antenna on the earth .
Read moreHow does a transponder work?
A transponder will send an identifying coded signal in response to a transmitted interrogation from a ground-based radar station . An air traffic controller can then view the identified blip on a screen and know who it is and provide direction to the flight crews maintaining adequate separation with other blips.
Read moreWhat is transponder used for?
A transponder is a wireless communications, monitoring, or control device that picks up and automatically responds to an incoming signal . The term is a contraction of the words transmitter and responder.
Read moreHow many MHz is a transponder?
Each of this transponder occupy part of the total satellite bandwidth (BW) i.e. 500 MHz . Figure-1 depicts transponder channels with each utilizing 36 MHz of bandwidth from the total BW of 500 MHz. The guard band of 4 MHz is provided between transponders to avoid interference.
Read moreWhat is the speed of satellite signals?
Radio waves are used to carry satellite signals. These waves travel at 300,000 km/s (the speed of light). This means that a signal sent to a satellite 38,000 km away takes 0.13 s to reach the satellite and another 0.13 s for the return signal to be received back on Earth.
Read moreWhat are transponders in satellite systems?
The term “satellite transponder” refers collectively to a transmitter-receiver subsystem on board the satellite that processes, amplifies and retransmits a range of frequencies (the transponder bandwidth) to another location/terminal/antenna on the earth .
Read moreHow much bandwidth accommodate for each transponder in C band?
The bandwidth allocated for C band service is 500 MHz , and this is divided into sub bands, one for each transponder. A typical transponder bandwidth is 36 MHz, and allowing for a 4-MHz guard band between transponders, 12 such transponders can be accommodated in the 500-MHz bandwidth.
Read more