Global Synchronisation Channel Number (GSCN). NR-ARFCN is applicable to the channel bandwidth. GSCN is applicable to the Synchronisation Signals / PBCH Block. NR-ARFCN uses a fine raster to provide flexibility. GSCN uses a coarse raster to reduce cell search times.17 Tem 2020
Read moreWhat is center frequency in LTE?
We use the correlation amplitude to decide which 7.68 MHz wide snapshot encompasses the LTE signal center frequency. Once the signal in one snapshot is classified as LTE, two more snapshots are captured in order to cover 20 MHz, the maximum LTE bandwidth.
Read moreWhat is LTE raster?
The center frequency of an LTE carrier is assumed to be on a 100 kHz channel raster (known also as carrier grid) in order to allow the LTE UEs to search a limited number of carrier frequencies in the frequency bands they support and synchronize within a reasonable amount of time after being activated.18 May 2018
Read moreWhat is the range of FR2 defined by 3GPP?
FR2. 24250 MHz – 52600 MHz .
Read moreWhat is the maximum bandwidth allowed in 5G?
In comparison, 5G NR maximum carrier bandwidth is up to 100 MHz in frequency range 1 (FR1: 450 MHz to 6 GHz), or up to 400 MHz in frequency range 2 (FR2: 24.25 GHz to 52.6 GHz) that can be aggregated with a maximum bandwidth of 800 MHz .
Read moreWhat is frequency raster in 5G?
The global frequency channel raster defines a set of RF reference frequencies . The RF reference frequency is used in signalling to identify the position of RF channels, SS blocks and other elements. The global frequency raster is defined for all frequencies from 0 to 100 GHz.
Read moreWhat is frequency raster in LTE?
The center frequency of an LTE carrier is assumed to be on a 100 kHz channel raster (known also as carrier grid) in order to allow the LTE UEs to search a limited number of carrier frequencies in the frequency bands they support and synchronize within a reasonable amount of time after being activated.18 May 2018
Read more