GSM mobile system like other communication systems has the frequency band used in the systems depends on the type of the GSM system, cellular system means dividing the area region the system installed in it in to many cells, each cell and each channel must has it’s own frequency, so the frequency planning is very …
Read moreWhat is BCCH and TCH in GSM?
Abstract: The GSM system has two type of frequency carriers, namely the frequencies that carry the broadcast control channels (BCCH) and the frequencies carrying only traffic channel (TCH) .
Read moreWhat is BCCH in 2g?
From Wikipedia, the free encyclopedia. A broadcast control channel (BCCH) is a point to multipoint, unidirectional (downlink) channel used in the Um interface of the GSM cellular standard .
Read moreWhat is uplink and downlink frequency?
Uplink frequency is the frequency at which, the first earth station is communicating with satellite . The satellite transponder converts this signal into another frequency and sends it down to the second earth station. This frequency is called as Downlink frequency.
Read moreWhat is DL and UL frequency?
In case of FDD (Frequency Division Duplex) LTE downlink channel (DL, eNB transmits UEs receive) and uplink channel (UL, UEs transmit eNB receives) are transmitted simultaneously on different frequencies . Also each band is marked by LTE release number where it was defined.
Read moreWhy uplink and downlink frequency are not same in satellite?
It’s because lower frequencies get reflected by atmospheric bands and cannot penetrate to get through to the satellite . … Therefore, mobile-to-base station (uplink) frequencies are lower than base station-to-mobile(downlink) frequencies.
Read moreHow is network frequency calculated?
Mathematically, Frequency = f = c/λ . The frequency is expressed in “per second” or “Hertz”, abbreviated as Hz. In real life networks, the frequency is expressed in Megahertz (MHz) or Gigahertz (GHz).
Read more