5G can be significantly faster than 4G, delivering up to 20 Gigabits-per-second (Gbps) peak data rates and 100+ Megabits-per-second (Mbps) average data rates . 5G has more capacity than 4G. 5G is designed to support a 100x increase in traffic capacity and network efficiency.
Read moreWhat is scaling factor in 5G throughput calculation?
Due to BPC , the UE can support only two layers for each CC , resulting in a scaling factor is 0.5 . Alternatively, the UE may be configured to use four layers for each CC but a lower modulation order 64QAM is used instead, resulting in a scaling factor is 0.75.4 Şub 2021
Read moreHow is 5G bandwidth calculated?
Formula or equation for 5G NR throughput calculator ➤Tsμ : Average OFDM symbol duration in a subframe for μ value, T sμ = 10 -3/(14*2 μ) . ➤NPRBBW(j),μ : Maximum RB Allocation in bandwidth, BW(j)with numerology (μ), BW(j) is UE supported maximum Bandwidth in given band or in band combinations.
Read moreWhat is TB size in LTE?
TB Size(transport block size) defines how many bits MAC layer transfers to Physical layer per TTI (Transmission Time Interval, defined as 1ms). Note: TM1/TM2 can carry 1 TB Size per TTI, TM3/TM4 can carry 2 TB Size per TTI (two code word).
Read moreWhat is code rate in LTE?
LTE Quick Reference Go Back To Index Home : www.sharetechnote.com. Code Rate. Simply put, the code rate can be defined as the ratio of the data rate that is allocated for a subframe and the maximum data rate that ideally can be allocated in the subframe .
Read moreHow is data sent in LTE?
After the device’s radio context has been restablished, the cellular tower notifies the MME, which in turn notifies the S-GW, which is now able to route the message to the correct radio tower. Finally, the tower sends the data to the device through the device’s LTE modem interface .
Read moreWhat is rate matching in 5G?
The rate-matching is to extract the exact set of bits to be transmitted within a given TTI . The rate-matching for Turbo coded transport channels is defined for each code block: there are three basic steps composing a rate-matching. Namely, sub-block interleaver, bit collection, and bit selection.
Read more