Supplementary Downlink ( SDL ) and Supplementary Uplink ( SUL ) are modes that allow only downlink or uplink in those bands . SDL and SUL are meant to provide additional capacity. In practice, industry looks at 5G spectrum in terms of low-band (600-700 kHz), mid-band (3-5 GHz) and high-band (26-100 GHz).
Read moreWhat are SA NSA 5G bands?
The main difference of NSA (Non-Standalone Architecture) and SA (Standalone Architecture) is that NSA anchors the control signaling of 5G Radio Networks to the 4G Core, while the SA scheme connects the 5G Radio directly to the 5G core network , and the control signaling does not depend on the 4G network at all.
Read moreIs NSA an mmWave?
According to Chip vendor Qualcomm, all 5G mmWave deployments in the world are currently (March 2021) using 5G non-standalone (NSA) configuration .
Read moreHow fast is sub-6 5G?
Sub-6 GHz 5G (mid-band 5G), by far the most common, will usually deliver between 100 and 4,400 MBit/s but will have a much further reach than mmWave, especially outdoors. C-Band (n77/n78) will be deployed by various U.S. operators in 2022.
Read moreWhat is frequency range of 5G?
5G Ultra Wideband, Verizon’s millimeter wavelength (mmWave)-based 5G, operates at frequencies of about 28 GHz and 39GHz . This is considerably higher than 4G networks, which use about 700 MHz-2500 MHz frequency to transfer information.
Read moreWhat is FR1 band?
FR1 (4.1 GHz to 7.125 GHz ) band of frequencies are used for carrying most of the traditional cellular mobile communications traffic, while the FR2 (24.25 GHz to 52.6 GHz) band of frequencies are focused on short-range, high data rate capabilities.23 Nis 2020
Read moreWhat should 5G bandwidth be?
5G speed tops out at 10 gigabits per second (Gbps). 5G is 10 to x100 faster than what you can get with 4G.
Read more